You can use the procedure below to display a barometric pressure graph in the Barometer/Temperature Mode.

1.Enter the Barometer/Temperature Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the Barometer/Temperature Mode setting screen.

3.Use (A) and (D) to move the pointer to [SCREEN].

4.Press (C).

5.Use (A) and (D) to select a display type.

[VALUE]	Displays the latest measurement value only.
[GRAPH]	Displays a measurement value and a barometric pressure graph.

6.Press (C) to complete the setting operation.

This returns to the Barometer/Temperature Mode setting screen.

7.Press (E) to exit the setting screen.