You can select either meters (m) or feet (ft) as the Altimeter Mode display unit.

1.Enter the Timekeeping Mode or Altimeter Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the mode setting screen.

3.Use (A) and (D) to move the pointer to [UNIT].

4.Press (C).

5.If you started from the Timekeeping Mode in step 1, use (A) and (D) to move the pointer to [ALTIMETER].
If you started from the Altimeter Mode in step 1, advance to step 7.

6.Press (C).

7.Use (A) and (D) to select an altitude unit.

[METER]	Meters
[FEET]	Feet

8.Press (C) to complete the setting operation.

After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the mode setting screen will re-appear.

9.If you started from the Timekeeping Mode, press (E) twice to exit the setting screen.
If you started from the Altimeter Mode in step 1, press (E) to exit the setting screen.