You can specify either hectopascals (hPa) or inches of mercury (inHg) as the display unit for barometric pressure values.

1.Enter the Timekeeping Mode or Barometer/Temperature Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the mode setting screen.

3.Use (A) and (D) to move the pointer to [UNIT].

4.Press (C).

5.Use (A) and (D) to move the pointer to [BAROMETER].

6.Press (C).

7.Use (A) and (D) to select a barometric pressure unit.

[HECTOPASCAL]	Hectopascals (hPa)
[INCH OF MERCURY]	Inches of mercury (inHg)

8.Press (C) to complete the setting operation.

After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the measurement unit setting screen will re-appear.

9.Press (E) twice to exit the setting screen.