Enabling Auto Run Timing (Auto Run Detection)
Starting to run while Auto Run Timing (auto run detection) is enabled will cause run timing to start automatically.
-
1.Enter the Timekeeping Mode.
-
2.Hold down (A) for at least two seconds.
-
This displays the Timekeeping Mode setting screen.
-
3.Use (A) and (D) to move the pointer to [AUTO RUN DETECTION].
-
4.Press (C).
-
5.Use (A) and (D) to move the pointer to [ON] (enabled) or [OFF] (disabled).
-
6.Press (C) to complete the setting operation.
-
After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the Timekeeping Mode setting screen will re-appear.
-
7.Press (E) to exit the setting screen.
Top of page