If you want the watch to indicate true north instead of magnetic north, you need to specify your current location’s magnetic declination direction (east or west) and declination angle.

• The magnetic declination angle value can be set in 1° (degree) units only. Use a value that is closest to the angle you want to set.
  Example: For an angle of 7.4°, set 7°.
  Example: For an angle of 7°40’ (7 degrees, 40 minutes), set 8°.

1.Enter the Compass Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the Digital Compass Mode setting screen.

3.Use (A) and (D) to move the pointer to [MAGNETIC DECLINATION].

4.Press (C).

5.Use (A) (East) and (D) (West) to change the magnetic declination direction and angle.

Setting range: 90° west to 90° east

[0° (OFF)]	Magnetic north
[E]	Magnetic north east of true north (East declination)
[W]	Magnetic north west of true north (West declination)

• To stop the setting operation, press (E) and advance to step 7.

6.Press (C).

7.Use (A) and (D) to select whether or not you want to save your current settings.

[YES]	Saves current settings.
[NO]	Discards current settings.
[RETURN]	This returns to the magnetic declination angle calibration screen.

8.Press (C) to complete the setting operation.

After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the Digital Compass Mode setting screen will re-appear.

9.Press (E) to exit the setting screen.