You can use the procedure below to display an altitude graph in the Altimeter Mode.

1.Enter the Altimeter Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the Altimeter Mode setting screen.

3.Use (A) and (D) to move the pointer to [SCREEN].

4.Press (C).

5.Use (A) and (D) to select a display type.

[VALUE]	Display the latest measurement values only.
[GRAPH]	Display measurement values and an altitude graph.

6.Press (C) to complete the setting operation.

After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the Altimeter Mode setting screen will re-appear.

7.Press (E) to exit the setting screen.