Perform 3-point or figure 8 calibration whenever you notice the watch’s compass readings are different from those of another compass, or before setting out on a climb or trek.

• Note that accurate compass readings and/or calibration will not be possible in an area where strong magnetism is present.

3-Point Calibration

1.Enter the Compass Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the Digital Compass Mode setting screen.

3.Use (A) and (D) to move the pointer to [CALIBRATION].

4.Press (C).

5.Use (A) and (D) to move the pointer to [3-POINT].

6.Press (C).

This displays the 3-point calibration screen.

7.While keeping the watch horizontal, press (C).

This starts calibration of the first point, which causes [PLEASE WAIT] to appear on the display. [ROTATE 180°] will appear when calibration is successful.

8.Keeping the LCD of the watch pointing upwards, rotate it 180 degrees. Be as exact as possible.

9.While keeping the watch horizontal, press (C).

This starts calibration of the second point, which causes [PLEASE WAIT] to appear on the display. [TURN OVER] will appear when calibration is successful.

10.Turn the watch over so the LCD is pointing at the ground.

11.While keeping the watch horizontal, press (C).

This starts calibration of the third point, which causes [PLEASE WAIT] to appear on the display. [SUCCESSFUL] will appear when calibration is successful. A few seconds later, the watch will return to the Digital Compass screen.

Figure 8 calibration

1.Enter the Compass Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the Digital Compass Mode setting screen.

3.Use (A) and (D) to move the pointer to [CALIBRATION].

4.Press (C).

5.Use (A) and (D) to move the pointer to [FIGURE 8].

6.Press (C).

This displays the figure 8 calibration screen.

When the screen shown above appears, move your arm in a figure 8 pattern as shown in the illustrations below.

• Allow your wrist to twist.

• Keep your arm as far as possible from your body as you move it.

• [SUCCESSFUL] will appear when calibration is successful. A few seconds later, the watch will return to the Digital Compass screen.