Module No. 3452

Using Alarms

The watch will beep when the alarm time is reached. You can set up to four different alarms.

  • When snooze is enabled for an alarm, it will sound every five minutes up to seven times.
  • The beeper is muted in the cases described below.
  • While the battery indicator is bt_normal_batt_1 or lower

To configure alarm settings

1.Press (A).

This displays the Timekeeping Mode setting screen.

3452_Other_01

2.Rotate the rotary switch to move the pointer to [ALARM].

3.Press the rotary switch.

4.Rotate the rotary switch to move the pointer to the alarm whose setting you want to change.

5.Press the rotary switch.

6.Rotate the rotary switch to change the hour setting.

  • To cancel an alarm time setting, perform the steps below.

Num_circle_1 Press (C).

Num_circle_2 Rotate the rotary switch to select whether or not you want to save the current settings.

[YES]: Current settings saved

[NO]: Current settings not saved.

Num_circle_3 Press the rotary switch.

7.Press (D).

8.Rotate the rotary switch to change the minute setting.

9.Press (D).

10.Rotate the rotary switch to turn snooze on or off.

11.Press the rotary switch.

This turns on the alarm whose time setting you configured.

  • Turning on an alarm causes 3452_alm_on to appear on the display to the right of the time setting. If snooze is turned on, [SNZ] also appears.

12.Press (C) as many times as necessary to exit the setting screen.

To turn an alarm on or off

1.Press (A).

This displays the Timekeeping Mode setting screen.

3452_Other_01

2.Rotate the rotary switch to move the pointer to [ALARM].

3.Press the rotary switch.

4.Rotate the rotary switch to move the pointer to the alarm whose setting you want to change.

5.Press (D) to the alarm where the pointer is located between on and off.

Turning on an alarm causes 3452_alm_on to appear on the display to the right of the time setting. If snooze is turned on, [SNZ] also appears.

6.Press (C) as many times as necessary to exit the setting screen.

To stop a sounding alarm

Pressing any button while the beeper is sounding stops it.