If you want the watch to indicate true north instead of magnetic north, you need to specify the current magnetic declination direction (east or west) and declination angle.

• The magnetic declination angle value can be set in 1° (degree) units only. Use a value that is closest to the angle you want to set.
  Example: For an angle of 7.4°, set 7°.
  Example: For an angle of 7°40’ (7 degrees, 40 minutes), set 8°.

1.Press (A).

This displays the Digital Compass Mode setting screen.

2.Rotate the rotary switch to move the pointer to [MAGNETIC DECLINATION].

3.Press the rotary switch.

4.Rotate the rotary switch to configure the magnetic declination direction and angle settings.

Setting range: 90° west to 90° east

[0° (OFF)]: Magnetic north

[E]: East declination (Magnetic north is east of true north.)

[W]: West declination (Magnetic north is west of true north.)

• To return the setting to [0° (OFF)], press (D).

• To cancel the setting operation, perform the steps below.

 Press (C).

 Rotate the rotary switch to select whether or not you want to save the current settings.

[YES]: Current settings saved

[NO]: Current settings not saved

• Pressing (C) enables configuration of the magnetic declination direction and angle settings.

 Press the rotary switch.

5.Press the rotary switch to exit the setting screen.

This returns to the Digital Compass Mode setting screen.

6.Press (C) to exit the setting screen.