Before Getting Started...
This section provides an overview of your watch and explains how to connect with a phone. You can configure watch settings to connect with a phone at preset times each day and adjust its time settings in accordance with information obtained from a network time server. You can also change the watch’s time settings manually and configure other watch settings from the phone.
This watch is not a special-purpose measuring instrument. Measurement function readings are intended for general reference only.
The watch’s Altimeter Mode calculates and displays relative altitude based on barometric pressure readings produced by its pressure sensor. Because of this, altitude values displayed by the watch may be different from your actual elevation and/or sea level elevation indicated for the area where you are located. Regular calibration in accordance with the local altitude (elevation) indications is recommended.
Whenever using the Digital Compass of this watch for serious trekking, mountain climbing, or other activities, be sure always to take along another compass to confirm readings. If the readings produced by the Digital Compass of this watch are different from those of the other compass, perform 3-point calibration of the Digital Compass to ensure better accuracy.
Compass readings and calibration will not be possible if the watch is in the vicinity of a permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or electrical household appliances (TV, computer, cellphone, etc.)
Some of the functions of this watch cannot be used unless it is connected with a phone. You should also leave the phone’s location information setting turned on. Otherwise, the phone will not be able to acquire latitude and longitude information, which may cause the watch to display incorrect information.
The GPS navigation log data acquisition operation can cause deviation of the measurement intervals of other modes.
Note that the watch illustrations in this manual are intended for reference only. The actual watch may appear somewhat different than depicted in the illustrations.