Module No. 3452

Viewing Registered Points

You can use the procedure below to display details about registered points. You can also change icons assigned to points and delete points as required.

1.Press the rotary switch.

This displays the GPS Navigation Mode setting screen.

3452_GPS_08

2.Rotate the rotary switch to move the pointer to [RECALL].

3.Press the rotary switch.

4.Rotate the rotary switch to move the pointer to [POINT].

5.Press the rotary switch.

This displays a menu of dates and times that points were registered.

3452_GPS_13

6.Rotate the rotary switch to move the pointer to the date and time of the point you want to check.

7.Press the rotary switch.

This displays details about the selected point.

3452_GPS_15
  • Due to legal restrictions in certain countries and areas, the watch may not display latitude and longitude information.
Using GPS Outside Your Country

To change the icon assigned to a registered point

1.While point details are displayed, press the rotary switch.

3452_GPS_09

2.Rotate the rotary switch to move the pointer to the icon you want.

3.Press the rotary switch.

This changes to the icon you selected.

4.Press (C) as many times as necessary to return to the GPS Navigation Mode setting screen.

To protect a registered point

A protected point cannot be deleted.

While the menu of locations is displayed

3452_GPS_13

1.Rotate the rotary switch to move the pointer to the date and time of the point you want to protect.

2.Press (D).

This protects the selected point.

A protected point is indicated by 3452_protect.

  • Press (D) again to unprotect.

3.Press (C) as many times as necessary to return to the GPS Navigation Mode setting screen.

While the details of a particular point are displayed

3452_GPS_14

1.Press (D).

This protects the displayed point.

A protected point is indicated by 3452_protect.

  • Press (D) again to unprotect.

2.Press (C) as many times as necessary to return to the GPS Navigation Mode setting screen.

To delete a registered point

1.While the menu of registered points or the details of a particular registered point is displayed, press (A).

3452_GPS_10

2.Rotate the rotary switch to select a delete method.

[ONE]: Deletes only the currently selected point.

[ALL]: Deletes all points.

3.Press the rotary switch.

This deletes the point(s).

  • If you selected [ALL], press the rotary switch again to delete. Delete will also be executed automatically after about 10 seconds, even if you do not press the rotary switch again.

4.Press (C) as many times as necessary to return to the GPS Navigation Mode setting screen.