Setting the GPS Signal Receive Interval
Use the procedure below to specify the interval for GPS signal reception and position information acquisition during navigation.
-
1.If a navigation operation is in progress, stop it.
-
2.Press the rotary switch.
-
3.Rotate the rotary switch to move the pointer to [SETTING].
-
4.Press the rotary switch.
-
5.Rotate the rotary switch to move the pointer to [INTERVAL].
-
6.Press the rotary switch.
-
7.Rotate the rotary switch to display the GPS receive interval you want to use.
-
[NORMAL]: Acquires location information every minute.
[HIGH RATE]: Acquires location information every few seconds.
-
8.Press the rotary switch.
-
9.Press (C) as many times as necessary to return to the GPS Navigation Mode setting screen.