Wireless (Bluetooth) Connectivity Settings
Wireless Function On/Off
The [Wireless Function] of the Digital Piano is set to <On> by default. When necessary, such as when you want to stop the generation of radio waves, you can turn the [Wireless Function] <Off>.
-
Insert the Wireless MIDI & audio adaptor into the USB Type A port on the Digital Piano.
-
While holding down the “FUNCTION” button, press the D1 key (Wireless Function).
Switching On/Off or Changing Setting Values Using a Single Key (operation type D)
-
Default value: On
Setting Value |
Setting Details |
Off |
Turns off the Wireless Function. |
On |
Turns on the Wireless Function. |
Adjusting the Notification Tone Volume for Wireless Connection/Disconnection
You can adjust the Notification Tone Volume that sounds when the wireless connection status changes.
Notification Tones
Notification Details |
Notification Tone |
Connected to Bluetooth audio-enabled device |
A piano tone with an ascending melody plays. |
Disconnected from a Bluetooth audio-enabled device |
A piano tone with a descending melody plays. |
Connected to a Bluetooth Low Energy MIDI-enabled device |
A vibraphone tone with a ascending melody plays. |
Disconnected from a Bluetooth Low Energy MIDI-enabled device |
A vibraphone tone with a descending melody plays. |
Adjusting the Notification Tone Volume
-
While holding down the “FUNCTION” button, press the E}1 or E1 key.
Using the +/– Keys to Raise or Lower the Setting Value by 1 (operation type B)
-
Setting value: 0 (silence) to 10 (maximum volume)
-
Default value: 5
Key |
Setting |
E}1 |
Lowers the volume of the connection notification tone by 1 (–) |
E1 |
Raises the volume of the connection notification tone by 1 (+) |
E}1 + E1 |
Resets the volume of the connection notification tone to its default setting |