Turning Bluetooth On/Off
By default, Bluetooth is turned on when the Digital Keyboard is turned on.
Bluetooth can be turned off as needed when the Wireless MIDI & audio adaptor is plugged into the USB Type A port without a wireless connection being made, or when you want to stop the signal.
Turning Off Bluetooth
-
Press the WIRELESS button.
-
A low notification tone will play once, and Bluetooth turns off.
-
If the WIRELESS button was lit, it will turn off, and the external device that was connected via Bluetooth will be disconnected.
-
Turning Bluetooth back on
-
Press the WIRELESS button.
-
A high notification tone sounds approximately every second, and the WIRELESS button blinks in time with the notification tone. A low notification tone will then play once, and Bluetooth turns on.
-
If Bluetooth does not reconnect automatically
If the Digital Keyboard does not automatically reconnect to the external device even after Bluetooth is turned on again, the external device that was connected to the Digital Keyboard via Bluetooth might have been turned off, or Bluetooth may have been deactivated on the external device. Make sure that the external device is turned on and that Bluetooth is activated on the external device, and then try the following operations.
-
Follow the instructions shown in “Turning Bluetooth back on” again.
-
Turn off the Digital Keyboard, and then turn it back on.