Changing the Metronome Tempo
The tempo (beats per minute) of the metronome and the demo songs can be set between 20 and 255 (default value: 120).
-
The tempo of the demo song changes when the song is played in standard demo mode. In Feel Sync demo mode, the default setting of each demo song always determines the tempo for playback. For details on each demo mode, refer to “About the demo modes”.
-
Press and hold the FUNCTION button, and press the E3 key.
-
Do not release the FUNCTION button until step 3.
-
-
Use the C4 to E5 keys to change the tempo value.
To do this:
Operate as follows:
Lower the tempo by 1
Press the C{4 (–) key.1
Increase the tempo by 1
Press the E}4 (+) key.1
Input the tempo directly
Use the C4 (0) to E5 (9) keys to enter a three-digit value.
For 20, press “0-2-0”. For 120, press “1-2-0”. The tempo changes when the third digit is entered.2
Restore the default value
Press the C{4 (–) key and the E}4 (+) key at the same time.
-
Press and hold to change the value continuously.
-
Even if you have only entered two digits or less, releasing the FUNCTION button will confirm the value already entered (e.g., if you press “7-2” and then release the FUNCTION button, the tempo value will be 72).
-
-
To exit the settings, release the FUNCTION button.