Playing with Reverb
A reverberation effect (reverb) type that is appropriate for each tone is added to the tones on the Digital Keyboard by default. By changing the reverb type, you can change how the tone reverberates. The reverb can also be turned off to eliminate any resulting reverberations.
-
The default setting for the reverb on this Digital Keyboard is on.
Changing the reverb type
-
Press and hold the FUNCTION button, and press the F2 key.
-
A notification tone sounds, and the Digital Keyboard waits for you to select the reverb type.
-
Do not release the FUNCTION button until step 3.
-
-
Use the C2 to C4 keys to select the reverb type.
To select this reverb type:
Press this key:
(Default setting for each tone)
C2
Room 1–5
C{2–F2
Large Room 1–2
F{2–G2
Hall 1–6
A}2–C{3
Stadium 1–3
D3–E3
Plate 1–2
F3–F{3
Delay
G3
Pan delay
A}3
Long delay 1–2
A3–B}3
Church
B3
Cathedral
C4
-
When a key is pressed, a notification tone sounds and the reverb type corresponding to that key is selected.
-
Even while the FUNCTION button is held down, playing any key other than C2 to C4 will produce an instrument sound. While making this setting, you can play the keyboard to hear how the sound is produced by the selected reverb type.
-
-
To exit the settings, release the FUNCTION button.
Switching the reverb on/off
The default setting for the reverb on this Digital Keyboard is on. Follow the steps below to switch the setting on/off.
-
Press and hold the FUNCTION button, and press the E2 key.
-
Do not release the FUNCTION button until step 2.
-
Each time you press the E2 key, the setting toggles between on and off. A notification tone signals which setting you have switched to after you press a key.
Notification tone
Setting
High note plays
On (default setting)
Low note plays
Off
-
-
To exit the settings, release the FUNCTION button.