Module No. 5635

Specifying the Barometric Pressure Unit

You can specify either hectopascals (hPa) or inches of mercury (inHg) as the display unit for barometric pressure values.

1.Enter the Timekeeping Mode.

2.Hold down (D) for at least two seconds. Release the button when the name of the currently selected Home City appears on the display.

Example: When your Home City is Los Angeles

5594_fl_SET_HT_LOS_caps_comon

3.Press (E) eight times.

This causes [UNIT] to appear, with [hPa] or [inHg] flashing.

5594_52_ALTI

4.Press (A) to toggle between barometric pressure units.

[hPa]: Hectopascals

[inHg]: Inches of mercury

5594_53_54_fl_BARO

5.Press (D) twice to exit the setting screen.