Having the Camera Send Images to the Smartphone as They are Recorded (Auto Send)

You can configure the app so images are sent from the paired camera to the smartphone as soon as they are shot.
If there is no connection between the camera and smartphone when the images are shot, they will be sent as soon as a connection is established.

The camera operations you need to perform depend on the camera model. For full details, see the user documentation that comes with your camera.

1.Configure settings to send camera images automatically.

If you are configuring settings on the camera, enter a wireless mode, select “Wireless settings”, and then configure settings. ^*

If you are configuring settings with EXILIM Connect, connect the smartphone with the camera over a wireless LAN setting, and then configure EXILIM Connect settings using “Setting up the camera”. ^*

Sending Images to a Smartphone Automatically

* Depending on the camera model, this function may not be displayed or you may not be able to change its setting.

2.On the camera, enter the REC mode and shoot.

This will establish a wireless LAN connection between your camera and smartphone, and send the snapshot you just recorded to the smartphone.

With an EX-FR Series camera, images are sent to the smartphone when the camera enters the sleep mode.

Note

Auto Send cannot be enabled unless the camera is paired with a smartphone.

Both a Bluetooth and wireless LAN connection are required between the camera and smartphone to auto send camera images.

With some camera models, you can specify the size of snapshots sent to the smartphone using the camera’s “Resize before send” feature.

Auto Send is disabled while the camera’s Airplane Mode setting is “On”. Auto Send become re-enabled when the setting is changed to “Off”.

Images shot while the camera’s Auto Send setting is “On” will be sent to the smartphone, even if the app’s Auto Send setting is changed to “Off” before the images are sent.

Depending on the connected camera, turning off the camera while there are unsent images in memory will cause an alert message to appear.
If you want the images to be sent, leave the camera on until the send operation is complete.
Pressing the camera’s [ON/OFF] (Power) again will turn off the camera.

Depending on the connected camera, disconnection of the camera and smartphone while there are unsent images will cause an alert message to appear, and then the camera will automatically turn off after about one minute. In this case, the camera will try to send the images again after it is turned back on.