Module No. 3482

Turning Off an Alarm

To stop an alarm sound and/or vibration operation, perform the steps below to turn it off.

  • To reactivate an alarm sound and/or vibration operation, turn it back on.

1.Enter the Timekeeping Mode.

2.Hold down (A) for at least two seconds.

This displays the Timekeeping Mode setting screen.

3482_set_disp_caps

3.Use (A) and (C) to move the pointer to [ALARM].

4.Press (B).

5.Use (A) and (C) to move the pointer to the alarm you want to turn off.

3482_45_ALM

6.Press (B).

7.Use (A) and (C) to select [OFF].

8.Press (B).

9.Use (A) and (C) to select whether or not you want to save your current settings.

[YES]

Saves current settings.

[NO]

Discards current settings.

[RETURN]

Returns to the alarm setting screen.

10.Press (B) to complete the setting operation.

After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the alarm setting selection screen will re-appear.

11.Press (D) twice to exit the setting screen.

  • Turning off all alarms will cause 3475_inl_icon_ALM_on (alarm) to disappear from the display.
3482_46_ALM