The start time can be set in 1-second units up to 60 minutes.

1.Enter the Timer Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

3.Use (E) and (B) to specify the number of timer repeats.

4.Press (D).

5.Use (E) and (B) to display [1].

6.Press (D).

This causes the minutes digits to flash.

7.Use (E) and (B) to change the minutes setting.

8.Press (D).

This causes the seconds digits to flash.

9.Use (E) and (B) to change the seconds setting.

10.Press (A) to complete the setting operation.