Module No. 5641

Configuring Interval Timer Settings

  • If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.
Using the Timer

1.Enter the Timer Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

5641_44_TR

3.Use (E) and (B) to specify the number of timer repeats.

4.Press (D).

5.Use (E) and (B) to specify the position of the timer in the sequence.

  • To specify the first position, set [1].
5641_40_TR_comon

6.Press (D).

This causes the minutes digits of Timer 1 to flash.

7.Use (E) and (B) to change the minutes setting.

5641_41_TR_comon

8.Press (D).

This causes the seconds digits of Timer 1 to flash.

9.Use (E) and (B) to change the seconds setting.

5641_42_TR_comon

10.Press (D) twice.

This returns to the screen in step 5.

11.Repeat steps 5 through 10 as many times as necessary to configure the settings of other timers.

12.Press (A) to complete the setting operation.