If you want the watch to indicate true north instead of magnetic north, you need to specify your current location’s magnetic declination direction (east or west) and declination angle.

• The magnetic declination angle value can be set in 1° (degree) units only. Use a value that is closest to the angle you want to set.
  Example: For an angle of 7.4°, set 7°.
  Example: For an angle of 7°40’ (7 degrees, 40 minutes), set 8°.

1.Enter the Compass Mode.

Navigating Between Modes

2.Hold down (E) for at least two seconds. Release the button when [SET] starts flashing and then appears on the display.

3.Press (D) twice.

[DEC] will appear on the display, followed by [0°].

4.Use (C) (East) and (A) (West) to change the magnetic declination direction and angle.

Setting range: 90° west to 90° east

[0° (OFF)]: Magnetic north

[E]: East declination (Magnetic north is east of true north.)

[W]: West declination (Magnetic north is west of true north.)

• To return the setting to [0° (OFF)], press (A) and (C) at the same time.

5.Press (E) to complete the setting operation.