1.Enter the Alarm Mode.

Navigating Between Modes

2.Press (E) to scroll through alarm numbers ([AL1] to [AL5]) until the alarm you want to configure is displayed.

3.Hold down (A) for at least two seconds. Release the button when the hours digits start to flash.

4.Use (B) and (E) to change the hour setting.

• If you are using 12-hour timekeeping, [P] indicates p.m.

5.Press (D).

This causes the minutes digits to flash.

6.Use (B) and (E) to set the minute setting.

7.Press (D).

This causes the alarm type to flash.

8.Use (E) to specify an alarm type.

[DAILY]: Alarm sounds every day at the alarm time.

[1 TIME]: Alarm sounds only once at the alarm time.

[SCH]: Alarm sounds on the specified date.

Configuring Schedule Alarm Settings

9.Press (A) to exit the setting screen.

• [ALM] is shown on the display while an alarm is set.

10.Hold down (D) for at least two seconds to return to the Timekeeping Mode.

To stop the alarm

Pressing any button while the beeper is sounding stops it.