The countdown start time can be set in 1-second units up to 24 hours.

• If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.

1.Enter the Timer Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds. Release the button when the hour digits start to flash.

This causes the hours digit to flash.

3.Use (B) and (E) to change the timer hours setting.

4.Press (D).

This causes the minutes digits to flash.

5.Use (B) and (E) to change the minutes setting.

6.Press (D).

This causes the seconds digits to flash.

7.Use (B) and (E) to change the seconds setting.

8.Press (A) to exit the setting screen.