(2nd edition / S-V.P.A.M.)
- ▶About this Manual
- ▶Initializing the Calculator
- ▶Getting Started
- ▶Calculation Mode
- ▶Configuring the Calculator Setup
- ▶Inputting Expression and Values
- ▶Arithmetic Calculations
- ▶Fraction Calculations
- ▶Percent Calculations
- ▶Degree, Minute, Second (Sexagesimal) Calculations
- ▶Multi-Statements (fx-82MS/fx-85MS/fx-300MS/fx-350MS only)
- ▶Using Engineering Notation
- ▶Calculation History and Replay
- ▶Using Memory Functions
- ▶Pi (π), Natural Logarithm Base e
- ▶Trigonometric Functions, Inverse Trigonometric Functions
- ▶Hyperbolic Functions, Inverse Hyperbolic Functions
- ▶Angle Unit Conversion
- ▶Exponential Functions, Logarithmic Functions
- ▶Power Functions and Power Root Functions
- ▶Rectangular-Polar Coordinate Conversion
- ▶Factorial (!)
- ▶Random Number (Ran#)
- ▶Random Integer (RanInt#) (fx-220 PLUS only)
- ▶Permutation (nPr) and Combination (nCr)
- ▶Rounding function (Rnd)
- ▶Statistical Calculations (SD, REG*)
* fx-82MS/fx-85MS/fx-300MS/fx-350MS only
Using Memory Functions
Answer Memory (Ans)
Whenever you press after inputting values or an expression, the calculated result automatically updates Answer Memory contents by storing the result.
fx-82MS/fx-85MS/fx-300MS/fx-350MS: In addition to , Answer Memory contents are also updated with result whenever you press (%), , (M-), or (STO) followed by a letter (A through F, or M, X, or Y).
fx-220 PLUS: In addition to , Answer Memory contents are also updated with result whenever you press (%), , (M-), or (Min).
You can recall Answer Memory contents by pressing .
Answer Memory can store up to 15 digits for the mantissa and two digits for the exponent.
Answer Memory contents are not updated if the operation performed by any of the above key operations results in an error.
You can use the calculation result that is currently on the display (and also stored in Answer Memory) as the first value of your next calculation. Note that pressing an operator key while a result is displayed causes the displayed value to change to Ans, indicating it is the value that is currently stored in Answer Memory.
The result of a calculation can also be used with a subsequent Type A function (x2, x3, x-1, x!, DRG), +, -, xy, x√ , ×, ÷, nPr and nCr.
Example 1: To divide the result of 3 × 4 by 30
- (Continuing) 30
Example 2: To perform the calculations shown below:
- (Continuing) 789
Variables (A, B, C, D, E, F, M, X, Y) (fx-82MS/fx-85MS/fx-300MS/fx-350MS only)
Your calculator has nine preset variables named A, B, C, D, E, F, M, X, and Y. You can assign values to variables and use the variables in calculations.
To assign the result of 3 + 5 to variable A
To multiply the contents of variable A by 10
- (Continuing) (A)10
To recall the contents of variable A
- (Continuing) (A)
To clear the contents of variable A
Independent Memory (M)
You can add calculation results to or subtract results from independent memory.
The "M" indicator appears on the display when there is any value other than zero stored in independent memory.
To clear the contents of M
To add the result of 10 × 5 to M
- (Continuing) 105
To subtract the result of 10 + 5 from M
- (Continuing) 105(M-)
To recall the contents of M
- (Continuing) (M)
23 + 9 = 32
53 - 6 = 47
-) 45 × 2 = 90
99 ÷ 3 = 33
Clearing the Contents of All Memories
Independent memory and variable contents are retained even if you press , or turn off the calculator.
Perform the following procedure when you want to clear the contents of all memories.
fx-220 PLUS: (Mcl)