CASIO

Calculation Range	±1 × 10-99 to ±9.999999999 × 1099 or 0
Number of Digits for Internal Calculation	23 digits
Precision	In general, ±1 at the 10th digit for a single calculation. Precision for exponential display is ±1 at the least significant digit. Errors are cumulative in the case of consecutive calculations.

Functions	Input Range
sinx cosx	Degree	0 ≤ |x| < 9 × 109
	Radian	0 ≤ |x| < 157079632.7
	Gradian	0 ≤ |x| < 1 × 1010
tanx	Degree	Same as sinx, except when |x| = (2n - 1) × 90.
	Radian	Same as sinx, except when |x| = (2n - 1) × π/2.
	Gradian	Same as sinx, except when |x| = (2n - 1) × 100.
sin-1x, cos-1x	0 ≤ |x| ≤ 1
tan-1x	0 ≤ |x| ≤ 9.999999999 × 1099
sinhx, coshx	0 ≤ |x| ≤ 230.2585092
sinh-1x	0 ≤ |x| ≤ 4.999999999 × 1099
cosh-1x	1 ≤ x ≤ 4.999999999 × 1099
tanhx	0 ≤ |x| ≤ 9.999999999 × 1099
tanh-1x	0 ≤ |x| ≤ 9.999999999 × 10-1
logx, lnx	0 < x ≤ 9.999999999 × 1099
10x	-9.999999999 × 1099 ≤ x ≤ 99.99999999
√x	0 ≤ x < 1 × 10100
x2	|x| < 1 × 1050
x-1	|x| < 1 × 10100; x ≠ 0
x!	0 ≤ x ≤ 69 (x is an integer)
nPr	0 ≤ n < 1 × 1010, 0 ≤ r ≤ n (n, r are integers) 1 ≤ {n!/(n - r)!} < 1 × 10100
nCr	0 ≤ n < 1 × 1010, 0 ≤ r ≤ n (n, r are integers) 1 ≤ n!/r! < 1 × 10100 or 1 ≤ n!/(n - r)! < 1 × 10100
Pol(x, y)	|x|, |y| ≤ 9.999999999 × 1099 √x2 + y2 ≤ 9.999999999 × 1099
Rec(r, θ)	0 ≤ r ≤ 9.999999999 × 1099 θ: Same as sinx
a°b’c”	|a|, b, c < 1 × 10100; 0 ≤ b, c The display seconds value is subject to an error of ±1 at the second decimal place.
a°b’c” = x	0°0’0” ≤ |x| ≤ 9999999°59’59” A sexagesimal value outside of the above range is automatically treated as a decimal value.
xy	x > 0: -1 × 10100 < ylogx < 100 x = 0: y > 0 x < 0: y = n, m2n + 1 (m, n are integers) However: -1 × 10100 < ylog |x| < 100
x√y	y > 0: x ≠ 0, -1 × 10100 < 1/x logy < 100 y = 0: x > 0 y < 0: x = 2n + 1, 2n + 1　 m　 (m ≠ 0; m, n are integers) However: -1 × 10100 < 1/x log |y| < 100
a b/c	Total of integer, numerator, and denominator must be 10 digits or less (including separator symbol).
RanInt#(a, b)	a < b; |a|, |b| < 1 × 1010; b - a < 1 × 1010
GCD(a, b)	|a|, |b| < 1 × 1010 (a, b are integers)
LCM(a, b)	0 ≤ a, b < 1 × 1010 (a, b are integers)

Precision is basically the same as that described under "Calculation Range and Precision", above.

xy, x√y, x!, nPr, nCr type functions require consecutive internal calculation, which can cause accumulation of errors that occur with each calculation.

Error is cumulative and tends to be large in the vicinity of a function’s singular point and inflection point.

The range for calculation results that can be displayed in π form when MathI/MathO is selected for Input/Output on the SETTINGS menu is |x| < 106. Note, however, that internal calculation error can make it impossible to display some calculation results in π form. It also can cause calculation results that should be in decimal form to appear in π form.