Module No. 5556

Setting a Timer Start Time

A timer start time can be set in 1-second units up to 60 minutes. The procedure below shows how to configure a single timer for a countdown.

  • If a timer countdown operation is in progress, reset the timer to its current start time before performing this operation.

1.Hold down (A) for at least two seconds. Release the button when the number of timer auto repeats setting (01 to 20) starts to flash.

5556_36_TR

2.Use (D) and (B) to specify [01] as the number of timer auto repeats.

5556_36_TR

3.Press (C).

4.Use (D) and (B) to display [1].

5556_37_TR

5.Press (C).

This causes the minutes digits to flash.

6.Use (D) and (B) to change the timer minutes setting.

5556_38_TR

7.Press (C).

This causes the seconds digits to flash.

8.Use (D) and (B) to change the start time seconds setting.

5556_39_TR

9.Press (A) to exit the setting screen.