You can specify up to 10 target times, each of which can be up to 24 hours, in one-second units.

• If you want to specify multiple target times, specify the smallest time as Target Time 1, and the successive times in ascending order (Target Time 2, Target Time 3, etc.)

1.While the stopwatch is reset to all zeros, hold down (A) for at least two seconds. Release the button when [TGT] appears.

• You can toggle the Target Time function between enabled and disabled by pressing (D).

• [TGT] is shown on the display while the Target Time function is enabled.

2.Press (C).

3.Use (B) and (D) to select a target time number.

4.Press (C).

5.Use (B) and (D) to change the target time hour setting.

6.Press (C).

7.Use (B) and (D) to change the target time minute setting.

8.Press (C).

9.Use (B) and (D) to change the target time second setting.

• If you want to specify multiple target times, repeat steps 2 through 9 above.

10.Press (A) to exit the setting screen.