To stop an alarm sound and/or vibration operation, perform the steps below to turn it off.

• To reactivate an alarm sound and/or vibration operation, turn it back on.

1.Enter the Timekeeping Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the Timekeeping Mode setting screen.

3.Use (A) and (D) to move the pointer to [ALARM].

4.Press (C).

5.Use (A) and (D) to move the pointer to the alarm you want to turn off.

6.Press (C).

7.Use (A) and (D) to select [OFF].

8.Press (E).

9.Use (A) and (D) to select whether or not you want to save your current settings.

[YES]	Saves current settings.
[NO]	Discards current settings.
[RETURN]	Returns to the alarm setting screen.

10.Press (C) to complete the setting operation.

After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the alarm setting selection screen will re-appear.

11.Press (E) twice to exit the setting screen.

• Turning off all alarms will cause (alarm) to disappear from the display.