Configuring Alarm Settings
-
1.Enter the Timekeeping Mode.
-
2.Hold down (A) for at least two seconds.
-
This displays the Timekeeping Mode setting screen.
-
3.Use (A) and (D) to move the pointer to [ALARM].
-
4.Press (C).
-
5.Use (A) and (D) to move the pointer to the alarm you want to set.
-
6.Press (C).
-
7.Use (A) and (D) to select an alarm and snooze function ON/OFF setting.
-
[OFF]
Disables alarms, disables snooze.
[ON]
Enables alarms, disables snooze.
[ON (SNZ)]
Enables alarms, enables snooze.
- The currently selected setting will be indicated by a check mark () to the left.
-
8.Press (C).
-
9.Use (A) and (D) to set the alarm hour.
-
10.Press (C).
-
11.Use (A) and (D) to set the alarm minute.
-
12.Press (C).
-
13.Use (A) and (D) to select whether or not you want to save your current settings.
-
[YES]
Saves current settings.
[NO]
Discards current settings.
[RETURN]
Returns to the alarm setting screen.
-
14.Press (C) to complete the setting operation.
-
After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the alarm setting selection screen will re-appear.
- Turning on an alarm causes to appear on the display to the right of the time setting. If snooze is enabled, [SNZ] also appears.
-
15.Press (E) twice to exit the setting screen.
To stop a sounding alarm
While an alarm sound and/or vibration operation is being performed, press any button to stop it.