The start time can be set in 1-second units up to 60 minutes.

1.Enter the Timer Mode.

Navigating Between Modes

2.Hold down (A) for at least two seconds.

This displays the number of timer repeats (1 to 20) setting screen.

3.Use (A) and (D) to specify the number of timer repeats (Auto Repeat).

4.Press (C).

5.Use (A) and (D) to specify the position of the timer in the sequence.

6.Press (C).

This moves the cursor to the minutes setting.

7.Use (A) and (D) to change the minutes setting.

8.Press (C).

This moves the cursor to the seconds setting.

9.Use (A) and (D) to change the seconds setting.

10.Press (C).

11.Use (A) and (D) to select whether or not you want to save your current settings.

[YES]	Saves current settings.
[NO]	Discards current settings.
[RETURN]	Returns to the number of repeats setting.

12.Press (C) to complete the setting operation.

After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the Timer Mode screen will re-appear.