Module No. 5466

To correct hand alignment

1.Pull out the crown to the first click.

2.Hold down (C) for about five seconds.

This enables adjustment of second and minute hand alignment.

5466_23_HAC

3.Rotate the crown to align the second and minute hands with 12 o’clock.

4.Press (B).

This enables adjustment of hour hand alignment.

5466_24_HAC

5.Rotate the crown to align the hour hand with 12 o’clock.

6.Press (B).

This enable adjustment of the small hour and minute hands, and the time zone hand.

5466_25_HAC

7.Rotate the crown to align the small hour and minute hands with 12 o’clock, and the time zone hand with mark_triangle_D_L.

8.Press (B).

This enables adjustment of 3D Globe Dial alignment.

5466_26_HAC

9.Rotate the crown to align mark_triangle_U (UTC zone) with the mark_triangle_D_L.

10.Press (B).

This enables adjustment of day of the week setting.

5466_27_HAC

11.Rotate the crown to align the day of the week hand in the center of “SU”.

12.Press (B).

This enables adjustment of day indicator alignment.

5466_28_HAC

13.Rotate the crown to align “1” in the center of the day indicator.

  • The day of the week hand will move in accordance with the day indicator setting. Make sure that the day of the week hand is in the center of “SU”.

14.Push the crown back in.