Module No. 3584

Stopwatch

The stopwatch can measure elapsed time up to 23 hours, 59 minutes, 59 seconds (24 hours).

When this maximum limit is exceeded, elapsed time measurement returns to 0 and timing continues from there.

img_STW_2023_2

Measuring Elapsed Time

  1. Enter the Stopwatch Mode.

  2. Use the operations below to measure elapsed time.

  3. fl_stw_D_btn_sstrsst

    Elapsed time is shown in 1/100-second units for the first hour of the measurement. After the first hour, elapsed time is shown in one-second units.

    3584_fl_STW_1_hour
  4. Press (A) to reset the measurement time to all zeros.

Measuring a Split Time

  1. Enter the Stopwatch Mode.

  2. Use the operations below to measure elapsed time.

  3. Pressing (A) displays the elapsed time from the start of a race up to the point when you pressed the button (split time).

    fl_stw_DAAD_btn_sspsprest

    Elapsed time is shown in 1/100-second units for the first hour of the measurement. After the first hour, elapsed time is shown in one-second units.

    3584_fl_STW_SPL_1_hour
  4. Press (A) to reset the measurement time to all zeros.

Timing the First and Second Place Finishers

  1. Enter the Stopwatch Mode.

  2. Use the operations below to measure elapsed time.

  3. fl_stw_DAD_btn_s1g2g

    This displays the time of the first finisher.

    Elapsed time is shown in 1/100-second units for the first hour of the measurement. After the first hour, elapsed time is shown in one-second units.

    3584_fl_STW_1_hour
  4. Press (A) to display the time of the second finisher.

  5. Press (A) to reset the measurement time to all zeros.

Back

Next