Module No. 3584

World Time

World Time lets you look up the current time in any one of 38 cities around the globe, and UTC (Coordinated Universal Time).

img_WT_2025

Checking World Time

  1. Enter the World Time Mode.

  2. Entering the World Time Mode causes a World Time number and city name to appear first. After that, the display will appear as shown below.

    3584_16_WT

    To change the selected World Time city, press (D).

Specifying a World Time City

You can specify up to five cities as your World Time favorites. If you are in an area that observes summer time, you can also enable or disable summer time.

  1. Enter the World Time Mode.

  2. Use (D) to display the World Time number whose setting you want to configure.

  3. 3584_17_WT
  4. Hold down (A) for at least two seconds.

  5. This causes [WT] to flash on the display.

    3584_18_WT
  6. Use (B) and (D) to display the city you want to specify as a World Time City.

  7. Holding down (B) or (D) scrolls through settings at high speed.

  8. If you want to change the summer time setting, press (C).

  9. Use (D) to select a summer time setting.

  10. [AUTO]
    The watch switches between standard time and summer time automatically.

    [OFF]
    The watch always indicates standard time.

    [ON]
    The watch always indicates summer time.

    3584_19_WT
  11. Press (A) to complete the setting operation.

Note

While the setting is being configured, the watch will exit the setting operation automatically after about two or three minutes of non-operation.

While [UTC] is selected as the city, you will not be able to change or check the summer time setting.

The summer time setting you configure is applied to the currently selected city only. It does not affect other cities.

Swapping Your Home City Time and World Time

In the World Time mode, press (A) and (B) at the same time to swap your Home City time with your World Time.

3584_fl_HT_WT_change

Back

Next