Auto Time Adjustment

Your watch can connect with your phone to adjust the watch’s time setting.

If you leave the watch in the Calendar Mode, it will perform the adjustment operation automatically as you go about your daily life (as shown in the illustration), without any operation required by you.

Note

If the watch does not indicate the correct time even if it is able to connect with a phone, adjust the hand and day indicator positions.

Adjusting Hand and Day Indicator Alignment

If there is a World Time City specified with the CASIO WATCHES phone app, its time will also be adjusted automatically.

Auto time adjustment is performed at the times described below.

After your phone’s time zone or summer time setting is changed

After 24 hours or more have passed since the last time adjustment using Bluetooth connection

After 24 hours or more have passed since city swapping using CASIO WATCHES or watch operation

After 24 hours or more have passed since the last home city change or time adjustment using watch operation

Watch operation can be performed even while it is connected with your phone.

Triggering Immediate Time Adjustment

The watch’s time setting will be adjusted automatically whenever you establish a connection between the watch and a phone. Whenever you want to trigger immediate time adjustment, perform the procedure below to connect with a phone.

1.Move the phone close to (within one meter of) the watch.
2. Enter the Calendar Mode.: Navigating Between Modes
3. Hold down (B) for at least 0.5 seconds until the second hand points to [C]. Release the button as soon as the second hand points to [C].: When the watch connects with a phone, the second hand will normally move to [Y(YES)] and then the watch’s time setting will be adjusted.

Operation Guide

Module No. 5625

Auto Time Adjustment