The main hour, minute, and second hands indicate the current time.

The small hour and minute hands show another time (Dual Time).

①

Current location time (24-hour time)

One revolution every 24 hours.

②

Day of the week at current location

③

Dual Time hour

④

Dual Time minute

⑤

Dual Time hour (24-hour hand)

The hand points to the A-side for a.m. times, and to the P-side for p.m. times.

⑥

Current location date

Time Adjustment Using a Time Calibration Signal

Hold down (D) for at least 0.5 seconds until the second hand points to [RC].

• A manual time calibration signal receive operation cannot be performed while the watch is paired with a phone.

Swapping the Current Location Time and Dual Time

Hold down (B) for at least three seconds.

Connecting with a Paired Phone to Adjust the Watch’s Time

Hold down (D) for at least 0.5 seconds until the second hand points to [C].

Searching for a Paired Phone

Hold down (D) for at least five seconds.

In this mode, the hour, minute, second and 24-hour hands indicate the elapsed dive time and surface interval time.

Dive time

• To stop dive time measurement, hold down (D) for at least two seconds.

• Stopping dive time measurement starts surface interval measurement.

①

Dive time hours

This hand performs one revolution, which indicates two hours of dive time.
Starting from 12 o’clock, this hand points to 6 o’clock after one hour of dive time and 12 o’clock after two hours.

②

Dive time minutes

The hour and minute hands move together.

③

Dive time seconds

Surface interval

• To stop surface interval measurement, press (D).

• Stopping surface interval measurement starts dive time measurement.

①

Surface interval hours (24-hour time)

This hand performs one revolution, which indicates 24 hours of surface interval time.
Starting from 12 o’clock, this hand points to 6 o’clock after 12 hours of surface interval time and 12 o’clock after 24 hours.

②

Surface interval hours

③

Surface interval minutes

④

Surface interval seconds

The small hour and minute hands indicate the current time in the port you have specified.

• The main hour, minute, and second hands indicate the current time.

①

Tide Level

②

Current time in selected port

The second hand, and the small hour and minute hands indicate the elapsed stopwatch time.

• The main hour and minute hands indicate the current time.

①

Stopwatch seconds

②

Stopwatch hours

③

Stopwatch minutes

④

Stopwatch hours (24-hour time)

The hand points to the A-side for hours 0 through 12, and to the P-side for hours 12 through 24.

The second hand, and the small hour and minute hands indicate the current countdown time.

• The main hour and minute hands indicate the current time.

①

Timer seconds

②

Timer hours

③

Timer minutes

④

Timer hours (24-hour time)

The hand points to the A-side for hours 0 through 12, and to the P-side for hours 12 through 24.

The small hour and minute hands indicate the alarm time.
The second hand indicates the alarm enabled/disabled setting.

• The main hour and minute hands indicate the current time.

①

Alarm enabled/disabled

②

Alarm hour

③

Alarm minute

④

Alarm hour (24-hour time)

The hand points to the A-side for a.m. times, and to the P-side for p.m. times.