Module No. 5623

Using Watch Operations to Adjust the Time Setting

If your watch cannot connect with a phone for some reason, you can use watch operations to adjust date and time settings.

Selecting Your Home City’s Time Zone

Use the procedure in this section to select the time zone of the city you want to use as your Home City.

1.Loosen the crown and then pull it out to the second click.

The second hand indicates the currently selected time zone, while the mode hand indicates the current summer time setting.

  • The time zone is indicated as a time offset. ±0 hours is indicated when the second hand is at 12 o’clock, with other offsets indicated when it is to the left and right of 12 o’clock. For information about time zone positions, go to the section below.

Tokyo (+9 offset)

5623_12_ATDS

2.Rotate the crown to change the time zone.

3.Push the crown back in and then lock it.

Adjusting the Time and Day Setting

1.Loosen the crown and then pull it out to the second click.

The second hand will point to the currently selected time zone.

  • The mode hand will point to the summer time setting for the currently selected Home City.
5623_13_ATDS

2.Hold down (C) for at least one second.

This causes the second hand to move to 12 o’clock, and enables the minute setting operation.

3.Rotate the crown to change the minute setting.

4.Press (C).

The hour hand will move slightly, indicating that the hour setting operation is enabled.

5.Rotate the crown to change the hour setting.

6.Press (C).

This enables the year ten’s digit setting operation.

7.Rotate the crown to move the second hand to the desired setting for the year ten’s digit.

5623_14_ATDS

8.Press (C).

This enables the year one’s digit setting operation.

9.Rotate the crown to move the second hand to the desired setting for the year one’s digit.

5623_15_ATDS

10.Press (C).

This enables the month setting operation.

11.Rotate the crown to change the month.

5623_16_ATDS

12.Press (C).

The mode hand will move slightly, indicating that the day setting operation is enabled.

  • Changing the day setting will cause the mode hand to rotate repeatedly.

13.Rotate the crown to change the day.

5623_17_ATDS

14.On a time signal at the top of a minute, push the crown back in and lock it.

Configuring the Summer Time Setting (Home City)

The watch’s current time setting can be changed to summer time when required.

[STD]: The watch always indicates standard time.

[DST]: The watch always indicates summer time.

1.Loosen the crown and then pull it out to the second click.

The second hand will point to the currently selected time zone.

  • The mode hand will point to the summer time setting for the currently selected Home City.

2.Hold down (B) for at least one second.

Each time you hold down (B) for at least one second, the summer time setting will cycle to the next available option.

5623_18_ATDS

3.Push the crown back in and then lock it.