Module No. 5601

Checking the Current Altitude

1.Enter the Altimeter Mode.

Entering the Altimeter Mode will start altitude measurement and display the altitude at your current location.

  • You can navigate between display screens by pressing (D).
5594_35_fl_ALTI
  • The watch takes altitude readings every second for about the first three minutes. After that, it takes readings according to the watch’s auto measurement interval setting.
  • Check the information at the link below to find out how to configure the auto measurement interval.
  • To retrigger measurement, press (A).
  • Press (E) to return to the Timekeeping Mode.

Interpreting Altitude Graph Contents

5594_36_fl_ALTI

* 1 square (mark_square) is 10 m.