Module No. 3554

Enabling Step Reminder

Step Reminder displays an indicator and performs a sound or vibration alert when the watch determines you have not walked enough during a specific period. This is valuable feedback that helps you achieve your exercise goals.

If the watch performs this Step Reminder alert operation, try walking for about five minutes.

  1. Display the current time screen.

    2. Watch Mode

  2. Hold down (A) for at least two seconds.

    3. This enters the Control Mode.

  3. Use (A) and (D) to select [SETTING].

    4. 3554_SETTING

  4. Press (C).

    5. This displays the setting menu screen.

    3554_Set_Menu_caps

  5. Use (A) and (D) to move the pointer to [GENERAL SETTINGS].

  6. Press (C).

    7. This displays the GENERAL SETTINGS screen.

    3554_GENERAL_SET

  7. Use (A) and (D) to move the pointer to [STEP REMINDER].

  8. Press (C).

  9. Use (A) and (D) to select the step reminder ON/OFF setting you want.

    10. [OFF]

    Step reminder function off

    [ON]

    Step reminder function on

  10. Press (C) to complete the setting operation.

    11. After the setting operation is complete, a check mark appears for a few seconds, and then the step reminder function setting screen re-appears.

  11. Hold down (E) for at least one second to return to the current time screen.

Note

If you do not perform any operation for two or three minutes while the setting screen is displayed, the watch automatically returns to the current time screen.

Even if step reminder is turned on, the watch will not perform notification if any one of the conditions below exists.

When the watch detects it is not being worn

While the current time is within the period defined by the bedtime and wake-up times you specified

While an activity is in progress

While the battery level indicator is 3515_icon_inl_LOW or lower

When there is a sensor error

If behavior analysis does not detect walking and running, the watch may notify you that step reminder has determined that your step count is low.

Clearing an Ongoing Notification

Press any button to clear an ongoing step reminder notification.

Back

Next