Module No. 3506

Enabling Auto Pause

While Auto Pause is enabled, timing will pause whenever you stop running.

  1. Enter the Timekeeping Mode.

  2. Press (B).

  3. This displays the Training Mode screen.

  4. Hold down (A) for at least two seconds.

  5. This displays the Training Mode setting screen.

    3506_set_TR_caps
  6. Use (A) and (C) to move the pointer to [AUTO PAUSE].

  7. Press (B).

  8. Use (A) and (C) to move the pointer to [ON] (enabled) or [OFF] (disabled).

  9. Press (B) to complete the setting operation.

  10. After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the Training Mode setting screen will re-appear.

  11. Press (D) to exit the setting screen.

Note

You can also use G-SHOCK MOVE to enable or disable Auto Pause.

Back

Next