Module No. 3506

Enabling Auto Lap Timing

While Auto Lap Timing is enabled, each time you run the distance you specified with CASIO WATCHES the lap time will be recorded automatically.

Specifying the Distance for Auto Lap Timing

  1. Enter the Timekeeping Mode.

    2. Navigating Between Modes

  2. Press (B).

    3. This displays the Training Mode screen.

  3. Hold down (A) for at least two seconds.

    4. This displays the Training Mode setting screen.

    3506_set_TR_caps

  4. Use (A) and (C) to move the pointer to [AUTO LAP].

  5. Press (B).

  6. Use (A) and (C) to move the pointer to [ON] (enabled) or [OFF] (disabled).

  7. Press (B) to complete the setting operation.

    8. After the setting operation is complete, [SETTING COMPLETED] will appear for a few seconds, and then the Training Mode setting screen will re-appear.

  8. Press (D) to exit the setting screen.

Note

You can also use CASIO WATCHES to enable or disable Auto Lap Timing.

Back

Next