Module No. 3486

Enabling the Button Operation Tone

Use the procedure below to enable or disable the tone that sounds when you press a button.

  • [MUTE] is displayed while the button operation tone is disabled.

1.Enter the Timekeeping Mode.

2.Hold down (A) for at least two seconds. Release the button when [SET] stops flashing.

3486_set_comon

3.Press (C) eight times so [KEY♪] or [MUTE] is flashing on the display.

3486_66_OTH

4.Press (D) to toggle the button operation tone between enabled and disabled.

[KEY♪]: Operation tone enabled.

[MUTE]: Operation tone disabled.

3486_67_OTH

5.Press (A) to exit the setting screen.