Module No. 5713

Recording Your Current Location (Location Memory)

You can use CASIO WATCHES to record current location information.

  1. phone-s Tap the “CASIO WATCHES” icon.

  2. wat_s Enter the Compass Mode.

    3. Navigating Between Modes

  3. wat_s Hold down (C) for at least five seconds. Release the button when [MEMORY] starts to flash, and the second hand points to BLE_mark.

    4. When a location information receive operation is successful while the watch is connected with a phone, [MEMORY] will change to [OK].

    [ERR] will appear on the display if connection fails for some reason.

    [FAILED] arrowR [POSITION] will appear in sequence if location information acquisition fails for some reason.

    5713_86_fl_MobileLink

  4. phone-s Perform the operation shown on the phone screen to view the Location Memory information record.

    5. You can have only one location record in memory. Saving location information while there is already a location record in memory will overwrite the existing record with the new information.

Note

You can use the CASIO WATCHES phone app to change the information recorded in Location Memory to something else. Note that this operation is not supported while the watch is being used inside of China.

If there is location information stored in Location Memory, you can use Location Indicator to check the distance and bearing to the stored location.

Checking the Distance and Bearing to a Location Memory Point (Location Indicator)

Back

Next