1.Enter the Alarm Mode.

Navigating Between Modes

2.Press (D) to scroll through alarm numbers ([AL1] to [AL5]) until the number of the alarm you want to configure is displayed.

3.Hold down (B) for at least two seconds. Release the button when the hour digits start to flash.

4.Use (A) and (D) to change the hour setting.

• If you are using 12-hour timekeeping, [P] indicates p.m.

5.Press (C).

This causes the minutes digits to flash.

6.Use (A) and (D) to change the minute setting.

7.Press (B) to exit the setting screen.

8.Hold down (C) for at least two seconds to return to the Timekeeping Mode.

To stop the alarm

To stop the alarm after it starts to sound when an alarm time is reached, press any button.