Module No. 5618

Using the Schedule Timer

The schedule timer can be linked with the calendar of a paired phone, so the watch can display the remaining time of the currently ongoing scheduled event and/or its ending time.

Transferring Scheduled Event

Scheduled events can be transferred from your phone to the watch.

  • While the watch is connected with your phone, scheduled events are periodically transferred to the watch automatically.
  • Make sure that the BLE_mark symbol is shown on the watch display when you perform the procedure below.
  • If BLE_mark is not displayed, refer to the information at the link below.
Connecting with a Phone

1.phone-s Tap the “CASIO WATCHES” icon.

2.phone-s Perform the operation shown on the phone screen to transfer phone scheduled events to the watch.

Displaying an Scheduled Event

1.Enter the Timekeeping Mode.

Navigating Between Modes

2.wat_s Press (D).

  • This causes the display to change from the current time to an event.

Each press of (B) switches between the information as described below.

5618_fl_MobileLink
  • The mode hand indicates the time remaining until the currently ongoing event is complete. The mode hand points to [OVER] when the remaining time exceeds 120 minutes.
5618_17_MobileLink
  • When the remaining time of the currently ongoing scheduled event is 10 minutes or less, the watch display shows the remaining time, and counts it down in one-second units.
  • A beeper sounds for two seconds when the time setting is reached.