Module No. 5596

Adjusting Hand and Day Indicator Alignment

1.Pull out the crown to the second click.

2.Hold down (A) for at least five seconds. Release the button when the second hand moves to 12 o’clock.

This starts auto alignment of the hour hand, minute hand, and second hand.

  • After auto alignment is complete, the hands should be in the positions shown below.
5596_11_AHDIA

3.Press (A).

Confirm that the day indicator shows 1.

5596_13_AHDIA

4.If 1 is not shown for the day, rotate the crown until 1 is shown for the day.

5.Push the crown back in.

  • After finishing the above operation, configure time and date settings.
Time Adjustment