Module No. 5588

Adjusting the Time and Day Setting

1.Loosen the crown and then pull it out to the second click.

The second hand will point to the currently selected time zone.

  • The mode hand will point to the summer time setting for the currently selected Home City.
5588_12_ATDS

2.Hold down (C) for at least one second.

This causes the second hand to move to “A” (am) or “P” (pm), which indicates the hour and minute setting mode.

3.Rotate the crown to change the hour and minute settings.

  • While watching if the second hand pointed at A (a.m.) or P (p.m.), set the desired time.

4.Press (C).

This enables the year ten’s digit setting operation.

5.Rotate the crown to move the second hand to the desired setting for the year ten’s digit.

5588_13_ATDS

6.Press (C).

This enables the year one’s digit setting operation.

7.Rotate the crown to move the second hand to the desired setting for the year one’s digit.

5588_14_ATDS

8.Press (C).

This enables the month setting operation.

9.Rotate the crown to change the month.

5588_15_ATDS

10.Press (C).

The mode hand will move slightly, indicating that the day setting operation is enabled.

  • Changing the day setting will cause the mode hand to rotate repeatedly.
Hand and Day Indicator Movement

11.Rotate the crown to change the day.

5588_16_ATDS

12.In sync with a time signal, push the crown back in to start timekeeping, and then lock it.