Module No. 5550

Configuring Alarm Settings

  1. Enter the Alarm Mode.

    2. Navigating Between Modes

  2. Press (D) to scroll through alarm numbers ([AL1] to [AL5]) until the number of the alarm you want to configure is displayed.

    3. 5550_22_ALM

  3. Hold down (A) for at least two seconds. Release the button when the hour setting starts to flash.

    4. 5550_23_ALM

  4. Use (B) and (D) to set the alarm hour.

    5. If you are using 12-hour timekeeping, [PM] indicates p.m.

    5550_24_ALM

  5. Press (C).

    6. This causes the minutes digits to flash.

    5550_25_ALM

  6. Use (B) and (D) to set the alarm minute.

  7. Press (A) to complete the setting operation.

  8. Hold down (C) for at least four seconds to return to the Timekeeping Mode.

To stop the alarm

To stop the alarm after it starts to sound when an alarm time is reached, press any button.

Note

A beeper will sound for 10 seconds to let you know when the alarm time is reached.

Back

Next