Module No. 5544

Adjusting the Time and Day Setting

1.Pull out the crown to the second click.

The second hand will move to the city code of the currently selected Home City.

  • The mode hand will point to the summer time setting for the currently selected Home City.
5544_14_ATDS

2.Hold down (C) for about one second.

This causes the second hand to move to 12 o’clock, and enables the minute setting operation.

3.Rotate the crown to change the minute setting.

4.Press (C).

The hour hand will move slightly, indicating that the hour setting operation is enabled.

5.Rotate the crown to change the hour setting.

6.Press (C).

This enables the year ten’s digit setting operation.

7.Rotate the crown to move the second hand to the desired setting for the year ten’s digit.

5544_15_ATDS

8.Press (C).

This enables the year one’s digit setting operation.

9.Rotate the crown to move the second hand to the desired setting for the year one’s digit.

5544_16_ATDS

10.Press (C).

This enables the month setting operation.

5544_17_ATDS

11.Rotate the crown to change the month.

12.Press (C).

The mode hand will move slightly, indicating that the day setting operation is enabled.

5544_18_ATDS
  • Changing the day setting will cause the mode hand to rotate repeatedly.
Hand and Day Indicator Movement

13.Rotate the crown to change the day.

14.On a time signal at the top of a minute, push the crown back in.