Module No. 3564
Troubleshooting
I can’t pair the watch with a phone.
Q1I’ve never been able to establish a (pairing) connection between the watch and phone.
Are you using a supported phone model?
Check if the phone model and its operating system are supported by the watch.
For information about supported phone models, visit the CASIO Website.
Did you install the CASIO WATCHES phone app on your phone?
The CASIO WATCHES phone app needs to be installed on your phone in order to connect with the watch.
Are your phone’s Bluetooth settings configured correctly?
Configure the phone’s Bluetooth settings. For details about setting procedures, see your phone documentation.
iPhone Users
“Settings” “Bluetooth”
On
“Settings” “Privacy”
“Bluetooth”
“CASIO WATCHES”
On
Android Users
Enable Bluetooth.
Other than the above.
Some phones need to have BT Smart disabled to use the CASIO WATCHES phone app. For details about setting procedures, see your phone documentation.
On the Home Screen, tap: “Menu” “Settings”
“Bluetooth”
“Menu”
“BT Smart settings”
“Disable”.
I can’t reconnect the watch and phone.
Q1The watch will not re-connect with the phone after they are disconnected.
Is the CASIO WATCHES phone app running?
The watch cannot re-connect with your phone unless the CASIO WATCHES phone app is running on the phone. On your phone’s Home Screen, tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three seconds.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Have you tried turning your phone off and then back on again?
Turn your phone off and then back on, and then tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three seconds.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Is a timer countdown operation in progress?
Connection with a phone is not possible while there is 30 seconds or less remaining on a countdown timer operation. Stop the countdown operation before connecting with the phone.
Q2I can’t connect while my phone is in the Airplane Mode.
Connection with the watch is not possible while the phone’s Airplane Mode is enabled. After disabling the phone’s Airplane Mode, go to the phone’s Home Screen and tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three seconds.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Q3I changed the phone’s Bluetooth from enabled to disabled, and now I can’t connect anymore.
On your phone, re-enable Bluetooth, and then go to the Home Screen and tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three seconds.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Q4I can’t connect after turning off the phone.
Turn your phone off and then back on, and then tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three seconds.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Phone-Watch Connection
Q1I can’t establish a connection between the phone and watch.
Have you tried turning your phone off and then back on again?
Turn your phone off and then back on, and then tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three seconds.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Has the watch been re-paired with the phone?
After deleting pairing information from the CASIO WATCHES phone app, re-pair them.
If you are unable to establish a connection...
After deleting pairing information from the watch, re-pair it with your phone.
Changing to a Different Phone Model
Q1Connecting the current watch to another phone.
Delete the pairing information from your watch and then pair it with the phone you want to connect with.
Auto Time Correction by Bluetooth Connection (Time Correction)
Q1When does the watch correct its time?
The watch will connect with the phone and perform auto time correction at around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is automatically terminated after auto time correction is complete.
Q2Auto time correction is not performed at a scheduled time.
Is auto time correction not being performed according to its normal schedule?
Note that auto time correction is not performed for 24 hours after swapping of the Home Time and World Time, or after the time setting is corrected manually on the watch. Auto time correction will resume 24 hours after either of the above operations is performed.
Is auto time correction enabled?
Auto time correction will not be performed at the scheduled times if it is not enabled. Enable auto time correction.
Q3The watch does not connect with a phone and correct its time when I press (D).
A time correction operation will not start if you press (D) while the remaining countdown time is 30 seconds or less. Stop the timer operation and then press (D) again.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Q4Time is not displayed correctly.
If your phone is unable to receive a signal because you are outside its service range or for some other reason, the watch may not be able to display the correct time. If this happens, connect the phone to its network and then correct the time setting.
Step Count
Q1Displayed step count is not correct.
While the watch is on your wrist, it may detect non-step movements and count them as steps.
Also, step count problems can also be caused by how the watch is being worn and abnormal arm movement while walking.
Q2The step count does not increase.
To avoid miscounting non-walking movements, the step count or distance value is not displayed for about 18 seconds after you start to walk.
It appears only after you have continued walking for about 18 seconds, with the number of steps you took during the first 18 seconds included in the total.
Q3[ERR] appears when counting steps.
[ERR] (error) indicates that sensor operation is disabled because of sensor or internal circuitry malfunction.
If the indicator remains on the display for more than three minutes or if it frequently appears, it could indicate a faulty sensor.
Contact a CASIO service center or your original retailer.
Alarm and Hourly Time Signal
Q1An alarm does not sound.
The alarm’s settings may not be configured. Configure the alarm settings.
Q2The hourly time signal does not sound.
The hourly time signal may be disabled. Enable the hourly time signal.
Indicators
Q1I don’t know what mode the watch is in.
You can determine the current mode by checking the watch display. Use (C) to navigate between modes.
![3564_TM](fig/3564_TM_AHNIILwqpqfeuo.png)
Q2The current time indicated by the watch is off by one hour or 30 minutes.
The summer time setting is not correct. Select the correct setting.
Battery
Q1 is flashing on the display.
This indicates that battery power is getting low.
Request battery replacement from a CASIO service center or your original retailer.
Q2[R] is flashing on the display.
[R] may appear on the display when the watch’s battery power is low, or if you use the light or other functions a number of times during a short period, which momentarily causes the battery level to go low. If this happens, all watch functions, except for timekeeping, become disabled.
If [R] remains on the display or if it keeps appearing, it may indicate that the battery needs to be replaced.
Request battery replacement from a CASIO service center or your original retailer.
Other
Q1I can’t find the information I need here.
Visit the website below.